Last Updated: 30 August 2020
- 1 What type of best gun safe lighting system to be used?
- 2 Top 10 Best Gun Safe Lighting Reviews 2020
- 2.1 #1 – Illumisafe
- 2.2 #2 – Torchstar Safe Lighting Kit
- 2.3 #3 – Executive Gun Safe Lighting Kit
- 2.4 #4 – Kuled 10-led Wireless Motion-Sensing Stick
- 2.5 #5 – Liberty Safe Brightview Gun Safe Light
- 2.6 #6 – AMIR Cordless Motion Sensor LED Light
- 2.7 #7 – LOCKDOWN Cordless 75 LED Vault Light
- 2.8 #8 – OxyLED Motion Sensor Lights
- 2.9 #9 – Stack-On Motion Sensitive LED Safe Light
- 2.10 #10 – Sensky Motion Sensor LED Lighting Kit
- 3 Conclusion
Keeping your gun safe in the corner of the room is not a problem until your room has proper lighting, and you can get a view of everything inside it. But in most cases, the corners of the room might not receive enough light from the source. In that place, you might have to hold a battery-operated light or the flashlight of your mobile to get a clear view inside, which might be frustrating if you are cleaning your guns or addressing a particular problem of your safe.
Even if there is adequate lighting in your room, your safe might be large enough or have many sections in it, which might make the lower portion of the safe considerably dark. You must have realized that it is quite irritating to have a gun safe with lousy lighting. Here we bring you some of the best gun safes lighting kits that you can buy and install in your safe to give you a crystal-clear view of all your expensive possessions inside.
What type of best gun safe lighting system to be used?
To get an overall idea of the best gun safe lighting systems, look at our comparison below.
- LED vs. CFL: As you know, an LED is more power and cost-efficient than having a CFL inside a safe. A CFL will heat the interior if used for a long time, which is not always a good idea. If you’re using a CFL inside you are guns safe then be ready to pay more electricity bill then what you would if you had installed an LED.
- Power source: You can use two different kinds of power source AC or DC according to your needs for supplying electricity to the bulb. If you are using an AC supply, one of the significant disadvantages that you will face is having to drill a hole at the back of the safe to pass the wires through it. It might not always be a good idea to keep in mind the high quality and sturdy build of the safes present in the market today. The waterproof and fireproofing quality of the safe is destroyed once a hole is inflicted on its body. Whereas If you are using a DC power source, you need to change batteries frequently if you’re using you are guns once in a blue moon. Because in that case, the cells may drain, leaving you with no other option but to buy a new one, even if you have had the switch on for quite a small period.
- Motion sensor vs. switch: Two kinds of LED lights are available in the market. The first one turns on using a motion sensor and the second one manually by using a switch. The motion sensor works on the principle of displacement and will automatically turn on the light for you when it senses the door to open. Turning off the light is also done automatically as soon as the door is shut close after you are done with the organization or picking the items you want. In case of a switch, you have to manually turn it on or off and sometimes forget to turn it off after you have closed the safe, which is one of its major disadvantages.
- Mounting: To make the installation of a gun safe lightning a quick and efficient process, you need to consider the hardware kit provided with the light. A package that will allow you to fix your interior light using an easy to use or simple process is much recommended than using a kit which is complicated to set up.
Top 10 Best Gun Safe Lighting Reviews 2020
#1 – Illumisafe
The first kit in our list of the best gun safe lighting kits, the Illumisafe gun safe light, comes with a PIR motion sensor light activation. This LED light takes power from 3 AAA batteries you need to buy separately and are not included in the packaging.
This lighting kit is quite efficient in terms of power usage as the light is kept on until a maximum of 60 seconds after the last motion is detected. The small LED lights fitted on an easy-to-fit kit makes it quite easy to install even by an amateur. The contents included in the package are two LED lights screws for mounting and an optical velcro hook strip. The best part of this light is that it has a magnetic base that attaches itself to the metallic part of the safe without any hassle and can be adjusted anywhere as per requirement.
The product dimensions are 3.5 X 2.5 X 0.75 inches. Its powerful light with economic battery usage and magnetic base makes it one of the most preferred LED lighting systems to be bought for small and medium-sized safes. One thing to keep in mind is that the kit might not be suited to use in a large safe, which contains many compartments because of its small size.
The Torchstar LED Safe Lighting Kit is specially designed for large safes and safes having a lot of compartments in it. It contains four12 inches LED strip lights that can be fitted at various parts of the save as required. This lighting kit also comes with the motion sensor, which automatically turns the light on and off depending on the position of the door.
Using a voltage of 110 volts, the lighting kit has two AC plugs to supply power to the four LED strips. For the sake of lighting a large area inside the safe, the LED strips are connected by a 12 inches extension cables so that you can cover throughout the interior of the safe. It is quite affordable in terms of price and comes with a secure mounting option, which makes it one of the bestselling LED strip lights to be used in gun safes.
You don’t need to worry about the light quality as each of the LED light supplies 150 lumens, quite a considerable amount of the lighting for the interior of a gun safe. The kit’s lifespan is around 30000 hours and comes with three years of warranty, which provides customer satisfaction.
The third item in our list of best gun safe lighting reviews is the Executive Gun Safe Lighting Kit. This lighting kit is suitable for those who have a large gun safe with a maximum capacity of around three dozen guns. It contains a combination of five 20 inches of LED stirpes that can be easily attached to the safe wall using the adhesive or a Velcro mounting, making it easier for you to connect it either on the hard steel or on the carpet lined interior.
The intensity of the light emitted is 2250 lumens and has a motion sensor that automatically turns the light on and off. The lit takes power from an AC source and does require a hole at the back of your safe to connect it to the power supply. Made up of optical grade polycarbonate, these LED strip lights have a long life, with the company providing a lifetime warranty on the product. However, it might not be one of the cheapest lighting kits available in the market but is undoubtedly one of the best qualities.
This gun safe lighting kit facilitates those safes which are comparatively smaller in size than those intended to be used in the previous one. It contains a pack of three 7.5 inches LED lights and takes power from 4 AAA batteries. The back of the strips is made up of magnetic material and equipped with adhesives so that you can either attach to the steel walls in the interior of the safe or fix it on the carpet lining using the velcro.
The installation of the fourth item in our list of best gun safe lighting reviews is quite easy and doesn’t require much time or effort. To provide you with even lighting throughout the intended area, each of the bars has ten LED lights, each of them producing 80 lumens of intensity. This kit also makes use of the motion detectors to turn the lights on when you open the door of the safe and turn off whenever not required. Its smart features account for its power efficiency. The sun won’t light up automatically if there is already too much lighting inside the safe from an outside source, or during the daytime, and is enough for you to get a clear view of items inside it.
With adhesives so that you can either attached to the steel walls in the interior of the safe or fix it on the carpet lining using the Velcro straps. Its smart features account for its power efficiency. The light won’t light up automatically if there is already too much lighting inside the safe from an outside source, or during the daytime, and is enough for you to get a clear view of items inside it.
The next item in our list of best gun safe lighting is the Liberty safe Brightview gun safe light. The kit comprises of two LED strips that can be used in a small safe with minimum compartments. Each of the pieces contains 6 LED lights that draw power from a DC source like AAA battery.
Each of the stripes is 8 inches and has a built-in motion sensor to detect the opening and closing of the safe’s door. The lights come from the house of the well-known reliable manufacturer in the world, the Liberty Safes, which stands for the quality of the LED lights that are on par with the quality of the safes manufactured by Liberty. Mounting pins present on the strips make it easy and convenient to attach it to the fireboard and pull them out whenever not needed.
The battery life is expected to be around three months with moderate usage. But problems may arise due to less efficient motion detectors and may take the time or need a few to and fro movement of your hands to light up. Overall, this product is excellent in the medium price range and used in a small safe.
The AMIR Cordless Motion Sensor LED Light kit comes in six pieces packed together. All the LED lights consume electricity from a battery-powered DC source and thus do not require any work of wires or drilling, like those using an AC source. It will be a perfect buy for the gun of owners who have a lot of compartments or shelves inside the safe and require more lights to make every corner visible.
The kit is equipped with motion sensors that enable automatic turning on and off the lights. And unlike many of the motion sensor LED lamps available at this price range, the one equipped in this kit is a good one and instantly responsive. As a drawback, they do not contain magnetic backs to easily attached to the interior of the safe.
The LED lights use adhesive tapes, which are sometimes not strong enough to hold them and might require additional glue or tape. It might seem that 20 lumens are not a high intensity to be proud of, but keep in mind that there are six of them, and the addition of all the light from the sources will bring you exactly the perfect amount of light you need to organize your safe.
Do you have a safe with almost no compartments and need a single LED light that will illuminate throughout the interior of the safe? Then the seventh item of our list of the best gun safe lighting is best suited for you. The Lockdown Cordless 75 LED Vault Light is genuinely a cordless LED lamp, as the name suggests.
It draws power from 3 AAA cells and contains a combination of 75 LEDs, all together with a total intensity of 95 lumens. You can attach the light to the safe either by persuasive magnet letters to the back of the light or by using a screw attachment. It is quite evident and has a continuous runtime of five hours in a row. The manufacturer provides a 1-year warranty on the item and therefore getting you covered of all the structural in internal damage.
The dimensions of the kit measure 7.5 inches in length 3 inches in bread and 0.5 inches in height, most suited for a small or a medium-sized safe. However, this LED light doesn’t contain a motion sensor, and you have to turn on and off the light by using manually is present on the light board. This product is quite simple to set up and use, making it one of the best to buy in the market, looking at its price tag.
The company OxyLED has already made its name in the field of LED lighting. It comes in two variants: pack of 2 strips and a pack of 3 pieces. Both options make use of an automatic sensor using a passive infrared technology to detect movement, which works hugely find even in the dark.
The detection range is 10 feet, and the light turns off after 15 to 18 seconds of inactivity within the range. It has a detachable design for secure mount and pop off including an adhesive strip with magnetic fields so that you don’t need any other types of equipment or items to fix it to the walls of the safe. Each of the LED strips contains exactly 10 LED bulbs and gives you ample lighting throughout the safe. It is battery operated and requires four AAA cells to work correctly.
To ensure safety and enhance the durability of the world, they are enclosed within a high-quality aluminum alloy case with best in class heat dissipation performance so that it works the best with minimal damage. If you have a significant safe, consider buying the kit with three strips where if you are safe is a bit smaller in the size you can go with the two strips one.
The Stack-On Motion Sensitive LED Safe Light is designed for them who have a small and straightforward safe with a few guns and accessories inside it. It is a set of 3 LED light heads fixed on a base and is battery operated. This means that no external wiring or power supply is needed to run the LED light and thus to relieve you of the hassle to make a drill and create an outlet for the wires.
It is equipped with a motion sensor and turns automatic light on whenever the door of the safes is opened. You can also wish to operate on the manual switch to turn the light on if you want. As an added advantage, each of the lights can be independently positioned for a custom range of directional lighting. It is weighing around 11.8 ounces.
The product dimensions measure 16 inches in length 7 inches in breadth and 3 inches in height. Installation is quite easy as it comes with the mounting plate or hook and eye tape included with the packaging.
The Sensky Motion Sensor LED Lighting Kit is ideal for those people who have a gun safe with a capacity of more than or nearly five dozen guns. The light strip’s total length is a whopping 8.2 feet, enough to cover throughout the interior of the safe and allow light to fall on every corner.
It is a motion-controlled LED light and uses a PIR motion sensor to switch on or off the lights in the presence of any external movement. Each of the LEDs has a brightness of 6-7 lumen for better illumination inside the safe. It takes electricity from a DC supply of 12 volts and has a lifetime of 50,000 hours along with a 1-year warranty by the manufacturer.
The light strip is slim and has a sleek design that can be mounted with adhesive or a Velcro strap, purchased separately, and not included in the packaging. It requires a lot of wiring and might not be an easy task to set it up.
This marks the end of our list of the top 10 best gun safe lighting. All you need to decide now is the part of the safe you need to illuminate and the type of illumination you require: either automatic or manual. Once you have made up your mind, consider buying any of the ten best conserve lighting mentioned above as they are of good quality and have a long life, preventing you from getting your money wasted. Another thing to decide is whether you want your light to be active during a power cut.
If yes, then consider buying a lighting kit that uses a DC power source. Installation of the lighting kit is also something that must be taken care of. If you decide to install it on your own, buy a package that is simple to set up and easy to operate. Otherwise, you can go for the lighting kits with which are a bit complicated to install and take help from a professional.
We hope you have found our guide useful enough to choose an item from the best gun safe lighting and have gained enough knowledge about the best gun safe lighting kits available in the market.